ubermix Forums
General => How-to => Topic started by: wwelborn on October 12, 2012, 01:36:20 PM
-
How do I upload my Ubermix image to another USB Flash Drive? When I followed the rebuilding a base image instructions it worked fine on the USB keys that already had Ubermix on them, but I need to know how I can put it on new USB Keys so that we can image more computers at one time!
Thank you!
-
Based on these instructions:
http://ubermix.org/download.html
We did the following, on Linux:
1- Copy one of the USB drives that have the updated image to a file, called custom_ubermix.img:
sudo dd if=/dev/sdb of=custom_ubermix.img bs=1M
Be patient, there is no progress information.
Note: Use the instructions in the link above to find out if your drive is /dev/sdb or something else.
2- Unplug the original USB drive, and plug in a blank one (or one that you want to overwrite).
3- sudo umount /dev/sdb
4- sudo dd if=custom_ubermix.img of=/dev/sdb bs=1M
In this last step, be patient, because there is no progress information. It should take around 5 to 10 minutes, depending on the size of the image, and the speed of your USB drives and USB ports.
I hope it's clear. Using the Windows based tool in the link above, you should also be able to do a similar process of copying an existing USB drive to an image file, and then use that to create copies.
-
You can also follow the instructions here: http://wiki.ubermix.org/page/Making_copies_of_the_USB_key (http://wiki.ubermix.org/page/Making_copies_of_the_USB_key) . Should be even quicker :)