ubermix Forums
Technical => General Support => Topic started by: ssexton on March 29, 2012, 09:00:39 AM
-
We have successfully installed from the USB key ubermix on a set of Dell Latitude D610. We are now moving on to start working with a set of Earthwalk ebuddy 8.6. When we try to boot into the USB we instead enter into the grub file. What commands need to be entered here to successfully mount the USB to get the option of #1 installing ubermix for the first time. The USB key works fine on the next generation of Earthwalk 14RY and sucessfully boots into the menu choices. I'm assuming is some kind of issue with bios, but would greatly appreciate any guidance.
I appreciate any help or advice you can provide.
-
Using the instructions on https://help.ubuntu.com/community/BootFromUSB I try using the grub terminal to boot the USB. If I root (hd1,0) then do chainloader +1 followed by boot I get that it encountered an error and to ctrl+alt+delete to restart. If I use root (hd1,1) then do chainloader +1 followed by boot I get invalid executable format.
-
A couple of possibilities I can think of:
- The name of the USB key has been changed
- The name of the internal hard disk on the device is set to UBERMIX
My guess is it's number 1. The name of the USB key MUST be UBERMIX, or the key won't boot. If it's number 2 (which is pretty unlikely) then change the name of the hard disk in the device to something other than UBERMIX.
-
Moving this topic to General Support...
-
I positive the machine is not named the same as the USB Key, but I will check if the USB key name has changed. I do not feel this is the issue as it boots fine in the next generation of the laptops. There is something specific only to this one model of laptops.
-
i just plugged my USB key named UBERMIX into an old Gateway desktop (no OS on it) and it went to grub....what to do :'(
-
Try the CD Install method described here: http://wiki.ubermix.org/page/CD_Install (http://wiki.ubermix.org/page/CD_Install)
-
i will try that when I find a blank CD...
-
found aCD...burned install iso....trying CD in conjunction with USB key and nothing happens after I choose option 1
Old Gateway Desktop
-
No errors or messages? Check your downloaded image file and make sure you have the whole thing - the file should be ~2GB. Also try a different USB key. It sounds as though there is either something wrong with the image file or the key.
-
i tried an 8. & a 9.....one is 1.85 GB the other is 1.86 GB...maybe it is the Gateway architecture?? (thought that seems odd)...(i will try other old computers at school)