Technical > Development and Scripting

From ova to image

<< < (2/3) > >>

jnetman1:
Sounds like your disk is too small in your virtual machine. Default install wants 8Gb for the base, 4Gb for the user changes, and at least 2Gb for home folders. You could squeeze that down to about 10Gb when installing by choosing 2. Advanced Install and entering the minimum sizes for the partitions.

Aaron Preabt:
You would be correct. Thanks for the guidance!

Aaron Preabt:
Now for the next problem. After building my base image and booting to the CD and capturing on my thumbdrive, I am not able to boot a machine that I imaged with that drive. It's my base Aspire v5-131. The image I worked with was the 64-bit Ubermix 2.0. No errors were present during imaging, although it did go super fast. Not really sure what the problem is actually since everything appears to work great.

Aaron Preabt:
Hey Jim (or others), any advice on this?

jnetman1:
Could be that vbox didn't finish writing to the key. Definitely watch the usb indicator at the bottom of the vbox window to make sure that it is done before rebooting. Usually takes an extra 30 seconds or so.

Navigation

[0] Message Index

[#] Next page

[*] Previous page